arinc 600 backshells www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. f-18 cage code 06324 527-108 emi/rfi banding backshell for size 3 arinc 600 series connector b = band(s) supplied 600-052, one per entry location, omit for none position and dash no. (table i) omit unwanted positions 527-108 nf p a4 b4 c4 d4 e4 f4 b basic part no. finish (table ii) connector designator (table iii) position b position c 5.61 (142.5) a a view a-a 1.50 (38.1) 3.25 (82.6) jam nut (typ) position a position e position f position d 1.60 (40.6) shield termination area typ. entry dia (typ) metric dimensions (mm) are indicated in parentheses.
arinc 600 backshells www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. f-19 cage code 06324 1. metric dimensions (mm) are indicated in parentheses. 2. material/finish: backshell, fittings, nuts, clamps = al alloy/see table ii; hardware = sst/passivate dash no. 4 5 6 7 8 9 entry dia .50 (12.7) .63 (16.0) .75 (19.1) .88 (22.4) 1.00 (25.4) 1.13 (28.7) table i: cable entry 527-108 emi/rfi banding backshell for size 3 arinc 600 series connector symbol b c* g* j lf m n finish cadmium plate/olive drab black anodize anodic hard coat gold iridite over cadmium plate over electroless nickel cadmium plate/bright over electroless nickel electroless nickel cadmium plate/olive drab over electroless nickel table ii: finish options *anodize finish is not suitable for emi shielding or grounding applications. **applicable to corrosion resisting steel backshells and accessories. consult factory for other available finishes. finish zinc cobalt/dark olive drab cadmium plate/olive drab over electroless nickel cadmium plate/bright over electroless nickel cadmium plate/black zinc-nickel alloy/olive drab symbol nc nf t u** zn table iii: connector designator arinc 600 series connector backshells are designed to replace the insert retainer plates. due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. the following should be used to determine if a backshell modification is required. prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. connector designator p p1 p2 p3 p5 p6 connector description all manufacturer?s plug and receptacle shells, except for those listed below (prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) cannon bkad****322 series plug cannon/radiall environmental plug cannon/boeing bacc 66 plug radiall/boeing bacc66 plug cannon bkac & bkae xxx322 series environmental plug
|
